How to Make a Completely Insulated House?

Insulating your house is one of the most important aspects to focus on, while working on the construction plan. Presently, almost all the houses in Australia, are weatherproofed for a comfortable environment all year around. However, even after insulation, many houses do not end up achieving the right kind of temperature.

The reason behind that, can be the poor installation of the material, or incomplete insulation. A perfectly insulated house needs to be covered from all the areas that are directly connected to the outer perimeter. Including the attic, outer walls, basement or crawl area, windows and doors etc.

Here is the list of the most important parts of your house that need to be insulated, and their installation tips.

The Attic, Roofs and Ceilings

Attic or the roofs are the parts of the house that suffer the most in all weathers, with the direct sunrays, in summer, and freezing snow, in winter. The ceilings and the roofs, can make your house lose up to 45 percent of heating and cooling energy. Hence, the most important place to be insulated.

Installation Tips

1. If you are insulating your old house, you need to seal all the air leaks and repair the roof and other necessary areas, before you start insulating the attic.
2. The doors, windows or any other access to the attic are also need to be air sealed and insulated, along with the other parts.
3. Both, Loose-fill and batt, can be good options for the attic insulation. However, loose-fill would be more affordable and provide a better coverage if installed properly.

Loose-fill: Predominantly consist of small particles of cellulose and fiberglass, the loose-fill insulation install, either by being blown into the attic and cavities of finish walls, or sprayed onto these places, with water based adhesive.

Batt and Rolls: Generally, made of fiberglass, rock, wool, and cottons’ flexible fiber bind and cut into form of batt and rolls. The fiberglass insulation is one of the most popular types of batt or rolls insulation. This insulation install by placing the rolls across an unfinished attic floor, and on the spacing of wall suds.